Heated Sample Line 5M6/8EX-W

Part No.: 03B5540W

Product features

  • Electrically heated sample line completely assembled according to your specifications
  • Approval according to ATEX for mounting in explosion zones 1, 2, 21 and 22
  • With 2 explosion-proof PT100, intrinsically safe 2GD according to ATEX
  • Inner tube is non-replaceable
  • Operating temperature: max. +200 °C [+392 °F]
  • Available up to a length of 30 m (sold by the meter)
  • Inner tube made of stainless steel with Ø DN 6/8
  • Outer jacket is a black corrugated PA hose
  • Operating pressure: max. 100 bar g
  • Power: 230 V supplied by external explosion-proof temperature controller, 115 V (up to a length of 13 m) available as option
  • Optionally: connection fitting type E/EX with 4 electrical cables, 1.5 m long; explosion-proof set consisting of 1 temperature controller, 1 temperature limiter and 1 control panel to programm both devices; end fitting type W/EX

Certifications

Product information & downloads

Manual
Data sheet
CE Certificate
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Applications
    The electrically heated, plug-in M&C sample lines series 5-N/M/H EX are used in gas analysis systems to avoid a distortion of measuring values and they also serve as anti-freeze protection during the transport of sample gas from the sample point to the gas conditioning system or directly to the heated analyzer (above dew point).
  • Product features
    Type 5M EX with non interchangeable stainless steel 316 tube, DN 6/8, max. 200 °C
    Type Regulated heating
    Explosion-proof Yes
    Temperature 200 °C [392 °F]
    Replaceable No
    Diameter DN 6/8
    Material Stainless steel
    Installation Flexible

Options & spare parts
Heated Sample Line 5M6/8EX-W

Here you get an overview of suitable options & spare parts

Product options

Options
Heated Sample Line 5M6/8EX-W

Configure the product in 4 steps

Was frequently viewed

Oblique view of Gas Sample Probe SP2000-H and weather protective cover

Gas Sample Probe SP2000-H

20S2000

  • Explosion-proof
    • No
  • Heating
    • Yes
  • Temperature
    • 180 °C [356 °F]
  • Filter surface
    • Medium
  • Shutoff/blowback
    • No
  • Calibration
    • No
  • Portable
    • No
  • Power supply
    • 220‒240 V
  • Material
    • Stainless steel
Oblique view of Compressor Gas Cooler ECL/2

Compressor Gas Cooler ECL/2

02K4000X

  • Explosion-proof
    • No
  • Cooling
    • Compressor
  • Temperature
    • > 2 °C [> 28.4 °F]
  • Gas paths
    • 2
  • Flow rate/gas path
    • > 150 Nl/h
  • Material
    • Selectable
  • Power supply
    • 220‒240 V