Gas Sample Probe SP180-H/MA

Part No.: 02S1860

Product features

  • Compact gas sample probe for special applications aboard ships
  • DNV GL Type Approval Certificate VI-7-2
  • With innovative weather protection cover, not for mounting on open deck
  • With test gas connection according to EN 14181
  • Self-regulating heater heats filter housing and mounting flange to max. 180 °C [356 °F]
  • With low-temperature alarm contact: < 160 °C [320 °F], NO
  • With compact glass fiber filter element, other materials available
  • Small dead volume and fast response time
  • Easy installation and low maintenance
  • Power: 110–240 V, 50/60 Hz, 400 W
  • Material of sample-contacting parts: stainless steel, FKM, glass fiber
  • Optionally: sample tube made of Hastelloy®

Certifications

Product information & downloads

Manual
Data sheet
Unit calculator

Barometric adjustment of the operating altitude of O₂ analyzers without pressure compensation

Enter the planned operating altitude in the field. Set the analyzer to the calculated O2 vol% value at 1013 mbar (altitude = 0 m) in air to measure at the planned operating altitude without barometric error.

Result: 22,9378 [vol%] need to be set to measure at the planned altitude without barometric error.*

*Air with standard pressure 1013 mbar = 20.93 vol% O₂

Pressure drop and delay time

Enter your values in fields 1 to 3.

1

2

3

Result: 3,39 Delay time approx. in [s]*

* Single change of gas, for 90 % response time approx. 3 changes of sample volume are required.

Calculation of the pressureless 100 % H₂O saturation

Enter the required H₂O dew point (°C).
The calculation only provides sufficiently accurate values in the temperature range between -20 °C and +90 °C.

Pressure units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Temperature units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Length units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Area units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Volume units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Weight units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Energy units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow rate

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Flow velocity

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

Performance units

Enter a value to be converted in the respective field. All other fields will show the converted value immediately.

  • Applications

    The electrically heated M&C gas sample probe version SP180-H is applicable for continuous gas sampling. The compact design requires only limited space for installation. The gas sample probe SP180-H is equipped with an extra protective cover. GL type-approved certificate VI-7-2 for application aboard ships.

  • Description
    • Filter housing cover with Viton® O‑rings and filter element type S‑0,1GF, filter porosity: 0.1 µm
    • External filter electrically heated to 180 °C [356 °F] with self‑regulating heating elements
    • Low‑temperature alarm with potential‑free contact output at ‑20 °C below Tset
    • Including insulation cover
    • Mounting flange: DN 65 PN 6B with G 3/4" f connection thread
    • Material: stainless steel, Viton®, ceramics
    • Connection: sample gas outlet: tube fitting for tube DN 4/6, holder for heated line d = 60 mm, test gas connection: tube fitting for tube DN 4/6 with dummy cap
    • DNV‑GL type‑approved 42 189‑15HH VI‑7‑2 Edition 2012, environmental category H: ‑25 to +60 °C [-13 to +140 °F], vibrations table 3.16, characteristic curve 2b
  • Product features
    Probe type SP180-H/MA, 110-240 V, for marine use
    Explosion-proof No
    Heating Yes
    Temperature 180 °C [356 °F]
    Filter surface Small
    Shutoff/blowback No
    Calibration No
    Portable No
    Power supply 110‒120 V 220‒240 V
    Material Stainless steel

Options & spare parts
Gas Sample Probe SP180-H/MA

Here you get an overview of suitable options & spare parts

Product options

Options
Gas Sample Probe SP180-H/MA

Configure the product in 4 steps

Was frequently viewed

Oblique view of Gas Sample Probe SP2000-H and weather protective cover

Gas Sample Probe SP2000-H

20S2000

  • Explosion-proof
    • No
  • Heating
    • Yes
  • Temperature
    • 180 °C [356 °F]
  • Filter surface
    • Medium
  • Shutoff/blowback
    • No
  • Calibration
    • No
  • Portable
    • No
  • Power supply
    • 220‒240 V
  • Material
    • Stainless steel
View of individual components Sample Tube SP30-H2

Sample Tube SP30-H2

02S9025P

  • Material
    • Stainless steel
  • Explosion-proof
    • No
  • Heating
    • Yes
  • Portable
    • No
  • Length
    • 1000 mm [39.4"]
  • Power supply
    • 110‒120 V,
    • 220‒240 V
Oblique view of Peltier Gas Coooler ECP1000C

Peltier Gas Cooler ECP1000C

01K1400X

  • Explosion-proof
    • No
  • Cooling
    • Peltier
  • Temperature
    • > 2 °C [> 28.4 °F]
  • Gas paths
    • 1
  • Flow rate/gas path
    • 150 Nl/h
  • Material
    • Selectable
  • Power supply
    • 110‒120 V,
    • 220‒240 V